All-Type Hardwood Flooring in Toronto offers residential and commercial installation services and renovation of hardwood floors. Our Hardwood Floor company provides installation, sanding, staining, refinishing and repair for Toronto, Mississauga and GTA. Quality & best prices guaranteed!
Our services include:
- Installation of Pre-Finished and Unfinished wood floors
- Installation of Laminate and Engineered wood floors
- Sanding and Staining of hardwood floors
- Refinishing and Repair of hardwood floors
|
Have Your Floors Done Right
The First Time
|
For Free Estimate call:
905-497-3888, 416-523-8750, or submit an Estimate Form
Installation
There are three ways to install a hardwood floor:
| 1. |
|
|
Nailing
down solid wood or strip floor to the plywood or
plank wood sub-floor.
|
| 2. |
|
|
Gluing
down engineered strips or parquet squares
directly to the concrete sub-floor.
|
| 3. |
 |
|
Floating
installation by gluing together the grooves of each
plank of engineered floor or locking laminate pieces
without glue if planks have locking system. |
Sanding
Restoration of hardwood floors will transform any old floor
your might have and make the floor look like new.
- Dull and worn finish from
years of use.
- Scuff marks and scratched
finish from furniture.
- Water and pet stains from
spills and and pets
- Deep gouges and grain raise
from heavy traffic or other abuse.
After any fixing you may or
may not have, we sand the floor several times depending on
wood specie is being sanded, and every time we use different
grid of sand paper from the roughest to finest, to have the
smoothest finish which is toped with protective coats.
Staining
Stains come in different colours and shades that could match
any decor ideas that you might have. They are designed to
penetrate the wood and to enhance the look of the grain. It
also seals the wood and takes the place of finishing coat
acting like wood sealer.
Finishing
After the floors are sanded and/or stained we clear them from
any dust and apply the first coat of urethane, then we allow
it to dry over night and when the weather factors permit and
everything is sufficiently dry we buff the floor again and put the next coat to adhere properly.
After this dries 2 more coats of urethanes are applied.
All polyurethanes are
available in three choices, all in water or oil base:
- High-gloss
- Semi-gloss
- Satin
